Wood Floor Buffer Helps You Clean Your Floors
Figure out what type of floor you have installed so you can start with proper cleaning. In case you are a proud owner of a sealed floor, then it is most likely a surface sealed floor that will not take much of your time. If your floor is older, it is probably a penetrating seal treated floor. You will need to apply more oils and wax to maintain this type of floor.
For cleaning hardwood floors, in the case of a surface sealed floor, you merely need to mop using a product recommended by your flooring manufacturer. Products like Oil Soap solution (which don’t generally contain oil) are usually safe. A damp mop and a little soap are often also safe for this type of floor. It’s best to dry out your floors when you are done, because that water can ruin the surface of your flooring.
In case you have a penetrating seal floor in your home, you won’t be able to use water based products while mopping. Instead, for routine cleanings, you can simply sweep or vacuum your floor. You will have deep cleaned floors if you remove the old wax coating and apply new one every once in a while. Usually, you will need to do this two times a year, but you can do it more often.
Simply follow the directions from manufacturer and make sure you are using stripper. Allow the hardwood floor to dry and try to ensure proper ventilation. Check what kind of wax can be used on your type of floor, the manufacturer should tell you this. Follow directions and apply one or two coats, or as many as desired.
And at last, we have an important step to do, to use a electric floor scrubber. Wax has to seal the floor properly and give it a beautiful shine, so you will have to use this process for sure. Many homeowners buy or rent home floor buffer polisher, because it shortens the time needed for the job. I think it is very important to know that a new floor bufer machines you buy will pay itself off after you use it for several times.
Bookmark to:
